this is information on a product in full production. for further information contact your local stmicroelectronics sales office. september 2012 doc id 023625 rev 2 1/4 1 SPC56XXMB spc56xx microcontroller family evaluation motherboard data brief ? production data features spc56xx modular evaluation system on/off power switch with led indicators board power supply: 12 vdc external supply voltage onboard stmicroelectronics ? l9758 voltage regulator with three simultaneous output at 1.2 v, 3.3 v and 5 v possibility to configure onboard peripherals to operate at 5 v or 3.3 v logic levels, depending on target two can channels with jumper enable ? one can channel with high-speed transceiver and db9 male connector ? one can channel with low-speed fault tolerant and high-speed transceiver (selectable with jumpers) and db9 male connector two lin channels with jumper enable ? one channel with transceiver and pin header connector populated ? one channel with footprints only one sci channel with jumper enables, transceiver and db9 female connector two flexray channels with jumper enables ? one channel with transceiver and db9 male connector ? one channel with footprint only four user push buttons with jumper enable and polarity selection four user led?s with jumper enables one potentiometer for analog voltage input pin array for accessing all i/o signals expansion connectors for accessing all i/o signals prototyping area with 0.1? spacing and soic footprint specifications: ? board size 5.5? x 9.0? ? 12 vdc center positive power supply with 2.5/5.5 mm barrel connector description the SPC56XXMB motherboard is an evaluation system supporting stmicroelectronics' spc560xx microprocessors. the complete system consists of an SPC56XXMB motherboard and an spc56xxxadpt mini module (not included) which plugs into the motherboard. different mini modules are available for evaluating the different devices in the spc560xx family of microprocessors. the evaluation system (motherboard and mini module) allows full access to the cpu, all of the cpu's i/o signals, and the motherboard peripherals (such as can, sci, lin). www.st.com
order codes SPC56XXMB 2/4 doc id 023625 rev 2 1 order codes table 1. device summary part numbers device supported SPC56XXMB mother board for spc56xx family of devices
SPC56XXMB revision history doc id 023625 rev 2 3/4 2 revision history table 2. document revision history date revision changes 11-sep-2012 1 initial release. spc560xxmb was previously in document dm00044221 (docid 022591) revision 1. 18-sep-2013 2 updated disclaimer.
SPC56XXMB 4/4 doc id 023625 rev 2 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a particular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. st products are not designed or authorized for use in: (a) safety critical applications such as life supporting, active implanted devices or systems with product functional safety requirements; (b) aeronautic applications; (c) automotive applications or environments, and/or (d) aerospace applications or environments. where st products are not designed for such use, the purchaser shall use products at purchaser?s sole risk, even if st has been informed in writing of such usage, unless a product is expressly designated by st as being intended for ?automotive, automotive safety or medical? industry domains according to st product design specifications. products formally escc, qml or jan qualified are deemed suitable for use in aerospace by the corresponding governmental agency. resale of st products with provisions different from the statem ents and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or register ed trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2013 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - swed en - switzerland - united kingdom - united states of america www.st.com
|
